Cold Spark Machine Dmx 600w Wedding Party Stage Cold Sparkler Fireworks Machine Cold Fountain Spark Machine

Product specification

Voltage： 220VAC or 110VAC，50HZ,60HZ 

Power Consumption： 600W 

Spray height： 3-5M 

Control ：DMX / Wire Remote 

Dmx Control Channels： 1 CH 

IP Grade： IP20 

Product dimension： 200*200*292(mm) 

Product weight： 6.8Kg

Precautions for the installation of stage cold sparkler fireworks:  

Circuit safety

The power supply cannot be connected behind a short-circuit protection device (such as an air switch, etc.), because the electric ignition head relies on the short-circuit spark as the excitation energy. When Hangzhou Stage Construction Company releases special effects smoke products, it is best to turn off the smoke alarm device first. 

Power requirements

12V DC power supply can be used for less than 10 products, 36V safe power supply can be used for 10 to 20 products, and 220V AC power supply must be used for more than 20 products (one power supply should not be connected to more than 50 products). Parallel connection is more reliable. 

Wire requirements

Use 1.5 square millimeter copper core cable for wiring within 50 meters. If there is an electric ignition concierge product, 2.5 square millimeter copper core cable must be used. Use 2.5 square millimeter copper core cables for about 100 meters. In addition, if there are many products, the number of wires should be appropriately increased. 

Precautions for the use of stage cold sparkler fireworks:  

1. Keep away from flammable and explosive materials when setting off, with the mouth of the tube facing upwards, and place it upright in the direction of the arrow (except for waterfalls). If it is set off outside, the audience will watch it from 6 meters away. If the flameout occurs, they should not approach it within three minutes. After that, the product will be pushed to the side of no one with a wooden stick;

2. When the number of cold fireworks products is less than 3, you can use a 1.5V battery to get power. When the number of products is more than 3, you can use a battery or a civilian power supply (use a 12V transformer to get power through a 220V civilian power supply). It is recommended to buy lighter; 

3. Before discharge, please do not connect the two poles of the power supply at the same time, and then connect them at the same time at the time of discharge. When installing the switch, make sure that the switch is turned off to avoid misfire. After the product is ignited, the switch should be turned off in time;

3. For a large number of cold fireworks, a long enough power cord (64-core flower wire is recommended) should be prepared, and the connection point with the flower core should be determined according to the placement distance. Yes,), twist the 2 strands of the power source of each stamen with the 2 strands of copper wire of the stripped electric ignition head respectively, wrap it with tape to avoid short circuit, and then use the battery or civil electricity (to install a switch) to set off;

4. Turn off the alarm when setting off in a place with a smoke alarm. When setting off in a place with a carpet or wooden floor, you need to add a 40cm*40cm flame retardant material to the bottom of the fireworks. Wet the carpet with water to prevent scouring the bottom or burning the carpet, it is recommended to use a safety fixing base;

5. Do not use flammable and explosive compressed air pressure sprays (such as colored aerosols) in the site during discharge to avoid chemical reactions and explosions;

6. If the product is damaged or falls out of the soil, please do not use it. If this kind of product is abnormal when it is fired, please soak the substandard product in water for half a day and then bury it deeply;

FAQ

Q1.What is your delivery time?

A:3-5days for sample or small batch orders, 15-30days for mass production

Q2.What is the payment method?

A:T/T,Paypal,WU,Ali Pay.

Q3.How do you guarantee the quality of your products?

A:All Marslite products 100% full test 24hours before goods delivery.

Q4.Are you a factory or a trading company?

A:Manufacturer, with about 100 person in factory.

Q5.Where is your factory?

A:No 195, sandong Road,Huadu Distric ,Guangzhou City, China, very near the Guangzhou Baiyun Airport.

Q6.How long is the product warranty?

A:2 Years Warranty 

Q7.Does your packaging ensure product safety?

A:Marslite will do Drop testing for package to make sure all products is well packed.

Q8.How is your after-sales service?

A:We will give you spare parts and technical support to help you fix the light.